91³Ô¹ÏÍø

Synopsys Ethernet GMAC IP

The Synopsys Ethernet GMAC IP enables the host to communicate data using the Gigabit Ethernet protocol (IEEE 802.3) at 10M, 100M, and 1G speeds. The IP is composed of three main layers: The Gigabit Ethernet Media Access Controller (GMAC), the MAC Transaction Layer (MTL), and the MAC DMA Controller (MDC). The MTL is highly configurable enabling optimum performance supporting a wide range of implementations based on end-system applications. A multitude of application interfaces are supported as well for easy SoC integration. Silicon-proven and designed for easy integration into ASICs and FPGAs the Synopsys GMAC IP comes with a user-friendly application interface so designers can easily set their functional and implementation objectives to meet design requirements. The IP is verified using state-of-the-art methodologies to reduce risk. This includes the RTL design, verification, hardware verification and interoperability tests.

The Synopsys Ethernet IP solutions consist of configurable controllers and silicon-proven PHYs supporting speeds of up to 100G, verification IP, IP Prototyping Kits, Software Development Kits and Interface IP Subsystems.

Synopsys Ethernet MAC 10/100/1000 Universal Datasheet

 

Highlights
Products
Downloads and Documentation

General Features

  • Compliant with IEEE 802.3 specifications
  • Support for IEEE 1588-2002 and IEEE 1588-2008 standards for precision networked clock synchronization
    • IEEE 802.3-az for Energy Efficient Ethernet (EEE)
    • IEEE 802.3x flow control automatic transmission of zero-quanta pause frame on flow control input de-assertion.
    • IEEE 802.1Q VLAN tag detection for reception frames
    • AMBA 2.0 for AHB Manager/Subordinate ports and AMBA 3.0 for AXI Manager/Subordinate ports
  • Configurable to support data transfer rates of 10/100/100 Mbps, 10/100 Mbps only or 1000 Mbps only
  • Multiple TCP/IP offload functions supported

PHY Interfaces

  • Gigabit Media Independent Interface (GMII)
  • Media Independent Interface (MII)
  • Reduced GMII (RGMII)
  • Serial GMII (SGMII)
  • Ten Bit Interface (TBI)
  • Reduced MII (RMII)
  • Serial MII (SMII)
  • Reduced TBI (RTBI)
  • Reverse MII (RevMII)

Application Interface Features

  • Fully synchronous design operating on a single system clock
  • Supports:
    • 32/64/128-bit data transfers
    • Individual programmable burst size for Transmit and Receive DMA Engines
    • Descriptor architecture allowing large blocks of data transfer with minimum CPU intervention & comprehensive status reporting for normal operation and transfers with errors
    • Programmable interrupt options for different operational conditions
  • Provides per-frame Transmit/Receive complete interrupt control
  • Provides separate ports for host CSR and host DATA access configurable for FIFO, APB, AHB, or AXI interfaces
    • Start and stop modes
    • All AHB burst types
    • AXI low-power interface
Ethernet MAC 10/100/1G UniversalSTARs Subscribe
Description: Ethernet MAC 10/100/1G Universal
Name: dwc_ether_mac10_100_1000_universal
Version: 3.74a
ECCN: 5E991/NLR
STARs: Open and/or Closed STARs
myDesignWare: Subscribe for Notifications
Product Type: DesignWare Cores
Documentation:
Toolsets: Qualified Toolsets
Download: dwc_ethernet